Questions about ARO
Moderator: UMMM461
- alex
- Membru legendar
- Posts: 1518
- Joined: 12 Mar 2007, 23:16
- Location: Bucuresti
Re: Questions about ARO
a cheap version would be to replace the pads only.
it seems that chinese spare parts now are in use even for aro, so this could be an option for u.
it seems that chinese spare parts now are in use even for aro, so this could be an option for u.
happily mending an Aro 320 D127
- cab_512
- Membru Devotat
- Posts: 476
- Joined: 05 Oct 2008, 19:47
- Location: Chisinau,Republica Moldova
Re: Questions about ARO
МоÑMaxim wrote: Hi all AROusers!
What was diameters of brake drums???????
On my cars - 280 mm front/rear
User, from another city said - 254 mm
All cataloges give size 228 mm (even for ARO 240/243/244 2.5 2.5D 3.1D LCV 10/1974 - 12/1993)?!?!?!?!
That to trust????? Per what years was the sizes varied?
Who is know brake shoes analogues (from another cars) for drums diam 280 mm??????
Tote muștele zboară dar nu toate fac miere!
- Maxim
- Membru Devotat
- Posts: 305
- Joined: 18 Oct 2007, 18:16
- Location: Russia , Krasnoyarsk city
- Contact:
Re: Questions about ARO
@Alex:To change only brake friction covers - there is a sole decision. Is sad. There was a large desire to establish the "firm" spare part.
The chinese spare parts, chinese automobiles - I can not combine these words. The awful quality does not allow it to make. I am not using chinese parts!
@cab512 : С передними Ñ
The chinese spare parts, chinese automobiles - I can not combine these words. The awful quality does not allow it to make. I am not using chinese parts!
@cab512 : С передними Ñ
- Maxim
- Membru Devotat
- Posts: 305
- Joined: 18 Oct 2007, 18:16
- Location: Russia , Krasnoyarsk city
- Contact:
Re: Questions about ARO
Question about flexible brake hoses: what is may be change? From what of cars?
Very "sly" threading on ends (inchs)!
Very "sly" threading on ends (inchs)!
- Maxim
- Membru Devotat
- Posts: 305
- Joined: 18 Oct 2007, 18:16
- Location: Russia , Krasnoyarsk city
- Contact:
Re: Questions about ARO
Quote from Alex (from "spare parts analogues"):
maxim, the rear ones on my truck look slightly different.
the place where the handbrake lever goes in is a slot (?) not a side cut on the rim of the metal.
maybe this version is an easier one to install.
In it there is all question!
Every ARO24-32, that I saw, have rear drums diam = 280 mm and completely not such rear brake shoes, as 7797112218 ARO!
Even DERWAYS-COWBOY (made in 2005 y. ), on ARO264 chassis with front disk brakes, has precisely same rear brake shoes, as every "old ARO24"(i.e. diam=280mm)!
Probably number 7797112218 ARO (for diam=229mm) concerns only to ARO10.
Also, it is not especially clear, how diam=280mm (number 7797112118 ARO) concerns to front brakes for ARO10?!
I has bought FSB360 FERODO PREMIER for front axle. I can tell precisely this is not full analogue ARO front brake shoes! I shall tell later, whether probably to establish them on ARO, and what is necessary to make for it.
maxim, the rear ones on my truck look slightly different.
the place where the handbrake lever goes in is a slot (?) not a side cut on the rim of the metal.
maybe this version is an easier one to install.
In it there is all question!
Every ARO24-32, that I saw, have rear drums diam = 280 mm and completely not such rear brake shoes, as 7797112218 ARO!
Even DERWAYS-COWBOY (made in 2005 y. ), on ARO264 chassis with front disk brakes, has precisely same rear brake shoes, as every "old ARO24"(i.e. diam=280mm)!
Probably number 7797112218 ARO (for diam=229mm) concerns only to ARO10.
Also, it is not especially clear, how diam=280mm (number 7797112118 ARO) concerns to front brakes for ARO10?!
I has bought FSB360 FERODO PREMIER for front axle. I can tell precisely this is not full analogue ARO front brake shoes! I shall tell later, whether probably to establish them on ARO, and what is necessary to make for it.
- Maxim
- Membru Devotat
- Posts: 305
- Joined: 18 Oct 2007, 18:16
- Location: Russia , Krasnoyarsk city
- Contact:
Re: Questions about ARO
Whether it is possible: starter from D127 to establish on L27D?
- cab_512
- Membru Devotat
- Posts: 476
- Joined: 05 Oct 2008, 19:47
- Location: Chisinau,Republica Moldova
- George
- Administrator
- Posts: 6951
- Joined: 11 Dec 2006, 21:18
- Location: Bucuresti
- Contact:
Re: Questions about ARO
cab_512, translate into english, please. on this topic, only english language is accepted! thank you.
ARO CLUB ROMANIA
- cab_512
- Membru Devotat
- Posts: 476
- Joined: 05 Oct 2008, 19:47
- Location: Chisinau,Republica Moldova
Re: Questions about ARO
Red-D127 Black-L27D
You do not have the required permissions to view the files attached to this post.
Tote muștele zboară dar nu toate fac miere!
- Maxim
- Membru Devotat
- Posts: 305
- Joined: 18 Oct 2007, 18:16
- Location: Russia , Krasnoyarsk city
- Contact:
Re: Questions about ARO
mulţumesc foarte mult cab_512!
- cab_512
- Membru Devotat
- Posts: 476
- Joined: 05 Oct 2008, 19:47
- Location: Chisinau,Republica Moldova
Re: Questions about ARO
only englishMaxim wrote: mulţumesc foarte mult cab_512!
Tote muștele zboară dar nu toate fac miere!
- George
- Administrator
- Posts: 6951
- Joined: 11 Dec 2006, 21:18
- Location: Bucuresti
- Contact:
Re: Questions about ARO
thank you for understanding!cab_512 wrote:only englishMaxim wrote: mulţumesc foarte mult cab_512!
the rest of the forum is open to romanian language... please respect the rules and stay "on topic"
ARO CLUB ROMANIA
- Maxim
- Membru Devotat
- Posts: 305
- Joined: 18 Oct 2007, 18:16
- Location: Russia , Krasnoyarsk city
- Contact:
Re: Questions about ARO
Today, I attended the website of HIDROJET.
I am right understand, that this plant also do not live?
...As all not rightly in this world!...
I am right understand, that this plant also do not live?
...As all not rightly in this world!...
- Maxim
- Membru Devotat
- Posts: 305
- Joined: 18 Oct 2007, 18:16
- Location: Russia , Krasnoyarsk city
- Contact:
Re: Questions about ARO
What marks/type the gearbox can to fit for D127, besides gearbox ARO-Cimpulung (4 and 5 st.) ?
Who know - please tell.
Who know - please tell.
- Maxim
- Membru Devotat
- Posts: 305
- Joined: 18 Oct 2007, 18:16
- Location: Russia , Krasnoyarsk city
- Contact:
Re: Questions about ARO
Dear ARO owners!
The drawing (figure) of a ARO frame, with the sizes up to verifying (check) points is very necessary for me!
On mine 244 many cracks in area of fastening of the upper levers (arms) of a front suspension are found.
It is drawing necessary urgently!!!
Somebody, please, help me!!!
The drawing (figure) of a ARO frame, with the sizes up to verifying (check) points is very necessary for me!
On mine 244 many cracks in area of fastening of the upper levers (arms) of a front suspension are found.
It is drawing necessary urgently!!!
Somebody, please, help me!!!