Hey Guys...
I'm trying to sort of reconstruct the front prop shaft I have.
Ideally, my plan was to adapt something, but I can't without the two parts selected in the picture.
The internal diameter of both is 22.5 mm and the "males" that go into these have 20 "spikes".
does anybody know of any other brand? or if I will be able to find them at all?
thanks for everything, you guys are always awesome, cheers!
front shaft for an ARO 10.4 diesel!
Moderator: UMMM461
- jumabago
- Incepator
- Posts: 36
- Joined: 18 Jun 2012, 02:07
- Location: Argentina
front shaft for an ARO 10.4 diesel!
You do not have the required permissions to view the files attached to this post.
Aro 10.4 DR, 1999, Renault F8Q624, 1.9
- Soryn
- Membru legendar
- Posts: 3367
- Joined: 13 Apr 2008, 18:38
- Location: Constanta
Re: front shaft for an ARO 10.4 diesel!
worn splines?
A new complet shaft it's about 100E in romania.
A new complet shaft it's about 100E in romania.
- jumabago
- Incepator
- Posts: 36
- Joined: 18 Jun 2012, 02:07
- Location: Argentina
Re: front shaft for an ARO 10.4 diesel!
hey SorinTVY,SorinTVY wrote:worn splines?
A new complet shaft it's about 100E in romania.
yes, the splines are totally worn...
I wonder, where in romania can I get a new one? is there a particular store or a site or anything like that?
i wish i could get it here for that kind of money...
thanks a lot!
Aro 10.4 DR, 1999, Renault F8Q624, 1.9
- Soryn
- Membru legendar
- Posts: 3367
- Joined: 13 Apr 2008, 18:38
- Location: Constanta
Re: front shaft for an ARO 10.4 diesel!
Small stores, in the town nearby the factory were the cars were built .
Its hard with the shipping. Sombody need's to by the part for you from the store ,end send it by a way of transport with aditional costs.
First thing you need to do,it's to mesure up the length off the shaft. The shaft it's made in different length's,different engine's .
Its hard with the shipping. Sombody need's to by the part for you from the store ,end send it by a way of transport with aditional costs.
First thing you need to do,it's to mesure up the length off the shaft. The shaft it's made in different length's,different engine's .
- jumabago
- Incepator
- Posts: 36
- Joined: 18 Jun 2012, 02:07
- Location: Argentina
Re: front shaft for an ARO 10.4 diesel!
do you know if you can just buy the 2 parts (they are similar in length and have the same diameter and number of splines) that plug into the gear box in the back and the front differential in the front?SorinTVY wrote:Small stores, in the town nearby the factory were the cars were built .
Its hard with the shipping. Sombody need's to by the part for you from the store ,end send it by a way of transport with aditional costs.
First thing you need to do,it's to mesure up the length off the shaft. The shaft it's made in different length's,different engine's .
my goal was actually to use just the neck (the section that has the splines) and adapt a new shaft, with entirely different (and easy to buy) u joints. so i can solve that problem for good...
thanks a lot for all your data!
Aro 10.4 DR, 1999, Renault F8Q624, 1.9
- jumabago
- Incepator
- Posts: 36
- Joined: 18 Jun 2012, 02:07
- Location: Argentina
Re: front shaft for an ARO 10.4 diesel!
PS: Also, do you know of anybody in the campulung area that, in exchange of a service charge, of course, would buy and send those parts to me? I'm telling you, if there was somebody, this could be a great thing. I mean, I'm sure a lot more people here in Argentina would be very interested in buying difficult parts like these! thanks again!
Aro 10.4 DR, 1999, Renault F8Q624, 1.9